How To Change The Clutch On Vespa Chetak?

Clutch এর তার change করার জন্য আপনাকে কিছু টুল সাথে রাখতে হবে। প্রথমবার একটু কষ্ট মনে হবে, পরে ইজি হয়ে যায়। Experience থেকে বলতে পারি Vespa Clutch Wire প্রতি ৩-৪ মাসে একবার ছিঁড়ে। (যদি আপনি প্রতিদিন চালান)। আগের Clutch Wire আর এখনের wire এর মধ্যে অনেক তফাৎ।

নোটঃ দূরে কোথাও ঘুরতে গেলে আগে অবশ্যই Clutch wire check করে নিবেন।

Tools and Materials Needed

• Screwdrivers (flathead and Phillips)
• Flywheel puller
• Clutch wires
• Gear oil

Safety Precautions

• Ensure the Vespa is on a stable surface, like a centre stand.
• Wear gloves and safety glasses.
• Disconnect the battery to avoid accidental sparks.

Step-by-Step Guide To Change The Vespa Clutch Wire

1. Prepare the Vespa

• Place the scooter on the centre stand.
• Disconnect the battery to prevent any electrical issues.
• Drain the gear oil from the transmission case by removing the drain plug.

5. Reassemble the Clutch

• Stack the new clutch plates in the correct order inside the clutch basket.
• Use the clutch compressor tool to compress the springs again.
• Replace the retaining clip and ensure it’s secure.

6. Reinstall the Clutch Assembly

• Slide the clutch assembly back onto the shaft.
• Secure it with the central nut, and use a torque wrench to tighten it to the manufacturer’s specifications.
• Reinstall the flywheel and secure it properly.

7. Replace the Transmission Cover

• If the gasket was damaged during removal, replace it with a new one.
• Reattach the transmission cover and tighten the bolts evenly to avoid warping.
• Refill the transmission with the appropriate gear oil.

8. Final Checks

• Reconnect the battery.
• Start the Vespa and engage the clutch to ensure everything is working smoothly.
• Test ride the scooter carefully, checking for any unusual noises or behaviours.

Tips

• Keep all parts organized during disassembly to make reassembly easier.
• Refer to the Vespa Chetak service manual for specific torque settings and other technical details.

Conclusion

Changing the clutch on a Vespa Chetak requires patience and attention to detail. Following these steps carefully, you can successfully replace the clutch and get your scooter back on the road. If you’re unsure about any step, consider consulting a professional mechanic.